Guide to OSHA-Approved Shoes (2024)

OSHA standards require protective footwear for workers at risk of injury from impacts, punctures or electrical hazards on the job site. OSHA-approved shoes must be certified impact and compression resistant by the American Society for Testing and Materials standards.

Work boot safety standards require that personnel wear safety footwear at all times. Safety shoes or boots must have a leather upper, non-skid soles, oil resistance and impact and compression resistance ratings of 75. The shoes must also have built-in toe caps to meet requirements.

Protective footwear is required for employees at risk of injury from:

• Rolling equipment
• Penetrating or crushing objects
• Hot or corrosive materials
• Poisonous or biohazardous materials
• Electrical hazards

Employers have a responsibility to conduct hazard assessments for the job site and determine the necessary PPE. Where warehouses may require steel toe boots to protect from rolling forklifts, electricians require a composite boot that will not conduct electricity. Less hazardous workplaces like kitchens may require puncture-resistant boots or toe caps to protect from falling knives or hot pans.

Employers must communicate their PPE selection and standards to workers. Some industries, like construction, also have specific standards of safety requirements.

Protective footwear requirements are common for:

• Manufacturing
• Renovations and remodels
• Auto repair
• Welding
• Construction
• Machine operation
• Landscaping
• Warehouses

OSHA has two specific regulations on PPE—29 CFR 1910.132 and 1910.136. For safety footwear to satisfy these regulations, it must comply with the standards of the American Society for Testing and Materials (ASTM).

The current safety shoe standard is ASTM 2413-18. Under this rule, toe caps must be built into safety shoes. ASTM-compliant boots also need to pass the ASTM 2412-18a testing standard for impact and compression resistance.

Workers can still wear overshoes, but overshoes do not count as protective equipment. Protective footwear includes steel toe, alloy toe or composite toe shoes and boots.

Work boots must pass impact and compression resistance standards to be ASTM-certified. They may also be tested for puncture resistance, metatarsal protection, static dissipation, electrical hazard resistance or conductive protection.

Protective standards marked on a shoe will include ASTM 2413-11 or ASTM 2413-18.

The number denotes the standard and the year. ASTM 2413-11 signifies that the shoe is compliant with the 2011 update to the rule. ASTM 2413-18 marks a shoe compliant with the 2018 update.

• M or W – Men’s or women’s
• I – Impact
• C – Compression
• MT – Metatarsal protection
• PR – Puncture resistance
• CD – Conductive protection
• EH – Electrical hazard resistance
• SD – Static dissipative

The ASTM standards replaced the American National Standards Institute (ANSI) Z41-1999 and ANSI Z41-1991 in 2005.

OSHA standards require puncture-resistant and slip-resistant footwear for construction workers. Safety boots on construction sites also need considerable impact and shear protection to shield workers from falling objects or heavy equipment.

Steel-toed boots are best-suited to meet all OSHA safety boot requirements. Standards also require hearing and eye protection.

Composite toe boots meet OSHA and ASTM safety requirements. They are made of non-metallic fibers like Kevlar® and do not conduct electricity. Composite toe boots are preferred by engineers, electricians and some independent contractors.

Composite toe boots do not offer the same protection from impact as steel-toed boots, however.

ALLOY TOE VS. STEEL TOE BOOTS

Alloy toe boots are made of materials like aluminum and titanium, which makes them lighter weight than steel toe boots. The metal plates are thinner, leaving more room in the toe of the boot. Steel toe boots have the advantages of lower costs and greater strength.

Thicker steel plates are heavier to wear and may cut into employee’s feet, but steel toe boots also provide stronger impact protection and sheer resistance. Employers should determine the level of risk at their work site and decide whether alloy or steel is best suited for their work hazards and employee comfort.

Note: Neither alloy toe nor steel toe boots should be used on jobs with electrical hazards. The metal toes conduct electricity. Electricians should use electrical hazard protection work boots.

Employers have been required to pay for employee protective equipment since 2008. This includes safety shoes, glasses and goggles, respirators and chemical-resistant gloves, among other PPE. Employers may purchase equipment on behalf of their employees or reimburse employee purchases.

Employers are not obligated to pay for standard work boots, everyday wear, voluntary dust masks or rain gear. Employers are also not obligated to pay for non-specialty safety footwear, provided that the employees are allowed to wear their gear off the work site.