When Making French Fries At Home, Should I Cut The Strips Into Water With Salt Added? Is That Correct? (2024)

Back To Dr. Potato Home

Q:

I read this on the internet about making fresh cut fries at home using a two-step method: If you want to pre-soak the potatoes to get rid of starch, sometimes it's fun to dump a ton of salt into ice water to make them extra salty.

A:

The main reasons to cut the potatoes and pre-soak in water are: To allow the excess starches and sugars to be removed from the outer surface of the fry strips AND to keep the potatoes from browning prematurely from exposure to air. Covering in water helps the potato from turning a dark color. Adding salt to the water to form a brine mixture may seem helpful and can impart a flavor to the potato strips, however, salt is a major contributor to the fry oil breaking down prematurely, so I don’t recommend it. There is a restaurant out in San Francisco that soaks their potatoes in a water and vinegar solution, it adds flavor to the finished fries but this water/vinegar solution in enough to brine the potatoes isn’t salt free. While 1 teaspoon of vinegar may not have sodium show up in the Nutrition Facts chart, 2 tablespoons will have 1 mg of sodium. The two step method is designed to rid the potato strips of excess water, so they turn out extra crispy the second time they are fried in oil. A typical Idaho russet potato is about 20% solids or starch and 80% water. Cutting the potatoes, blanching in oil and then letting the potatoes rest and frying a second time makes for an extra crispy fry.

When Making French Fries At Home, Should I Cut The Strips Into Water With Salt Added? Is That Correct? (2024)

FAQs

When Making French Fries At Home, Should I Cut The Strips Into Water With Salt Added? Is That Correct? ›

Covering in water helps the potato from turning a dark color. Adding salt to the water to form a brine mixture may seem helpful and can impart a flavor to the potato strips, however, salt is a major contributor to the fry oil breaking down prematurely, so I don't recommend it.

Should you soak french fries in salt water? ›

Fill a large bowl with cold water and stir in 2 tablespoons of salt. Place the sliced potatoes in the salt water and let them soak for 15 to 30 minutes. This will help them bake up crispier. When the potatoes are done soaking, drain them, and dry very well with a towel.

Why soaking potato strips in water and vinegar produces better fries? ›

The soaking, Mr. Nasr said, is the secret to the crisp texture of the fries. It draws out the starch, making them more rigid and less likely to stick together. The cooks fry them twice, first blanching them until slightly limp in peanut oil heated to 325 degrees, and again in 375-degree oil to crisp and brown them.

How long can cut fries sit in water? ›

How long can peeled and cut potatoes sit in water before cooking, before they begin taking on too much water? A: We usually recommend no more than 24 hours. You can keep the potatoes from absorbing the water by making sure the water is not salted, and is chilled (you can even add ice to the water).

How long should I leave my potatoes in water before frying? ›

Only as long as you need to hold the potatoes until needed for the fry stage(s). This could be as little as a few minutes – to overnight storage in your walk-in cooler.

What happens if you don't soak fries in water? ›

The main reasons to cut the potatoes and pre-soak in water are: To allow the excess starches and sugars to be removed from the outer surface of the fry strips AND to keep the potatoes from browning prematurely from exposure to air. Covering in water helps the potato from turning a dark color.

Do you rinse fries after soaking? ›

Soak, rinse, and pat.

Soaking them right after cutting minimizes oxygen contact and keeps the fries looking fresh and appetizing. After slicing all the potatoes, rinse them with cold water multiple times until the water runs clear. This process helps remove excess starch and sugars from the potato surfaces.

What to do after soaking fries in water? ›

Allow them to soak, 2 to 3 hours. (You can also stick them in the fridge and let them soak overnight.) When you're ready to make the fries, drain off the water and lay the potatoes on 2 baking sheets lined with paper towels. Blot with paper towels to dry them.

What is the best oil for french fries? ›

Refined peanut oil is the best oil to use for making french fries. You can also use canola or safflower oil. Additionally, restaurant fries are so crispy because, among other things, they use old oil continuously.

Why do you put potatoes in cold water before making french fries? ›

This step is commonly missed in making homemade fries, but it might be one of the most important! Soaking your fries in cold water helps remove excess starch, which allows for crispy, golden fries! The cold water bath also helps the french fries retain their shape and contributes to a fluffy inside.

What happens if you leave potatoes in water too long? ›

Just be sure to store peeled potatoes in water for no more than 24 hours. After that, the cool refrigerator air will convert the starches in the potatoes to sugar, causing the flavor and texture of the spuds to change.

What happens if you don't soak potatoes before air frying? ›

I wouldn't bother doing potatoes from the raw state, without soaking. It will take about a half an hour and the texture won't be nearly as rewarding. They just don't get very crispy without that cold soak.

Do you put potatoes in cold water after boiling? ›

Rinsing with hot water immediately after boiling can remove even . You always drop the potatoes in cold properly salted water and being it to a boil after. That is a rule and not a suggestion unless you want .

How do you get moisture out of French fries? ›

Blanching also works to reduce the moisture content of the French fry, helping them crisp up much more easily when fried. When the potatoes are transferred to the cold water after the hot liquid dip, the cells of the potato shrink, ensuring the fry will not absorb as much oil when it is later fried.

Is it better to salt fries before or after? ›

Unless a battered fry, they are not adding in salt during the process. I recommend not salting the fries till they come out of the fryer and even then, waiting for an order before salting as the fries can turn limp prematurely if salted too soon.

Should you soak potatoes in salt water before boiling? ›

Shower them with salt.

Dense potatoes don't absorb seasonings easily, so you'll need to salt the water liberally so that the water the potatoes do drink up also carries in seasoning. And because potatoes are so timid in flavor, they need that salt to bring them out of their shells.

References

Top Articles
Latest Posts
Article information

Author: Otha Schamberger

Last Updated:

Views: 6390

Rating: 4.4 / 5 (75 voted)

Reviews: 90% of readers found this page helpful

Author information

Name: Otha Schamberger

Birthday: 1999-08-15

Address: Suite 490 606 Hammes Ferry, Carterhaven, IL 62290

Phone: +8557035444877

Job: Forward IT Agent

Hobby: Fishing, Flying, Jewelry making, Digital arts, Sand art, Parkour, tabletop games

Introduction: My name is Otha Schamberger, I am a vast, good, healthy, cheerful, energetic, gorgeous, magnificent person who loves writing and wants to share my knowledge and understanding with you.