Pulmonary ventilation/perfusion scan: MedlinePlus Medical Encyclopedia (2024)

A pulmonary ventilation/perfusion scan involves two nuclear scan tests to measure breathing (ventilation) and circulation (perfusion) in all areas of the lungs.

How the Test is Performed

A pulmonary ventilation/perfusion scan is actually 2 tests. They may be done separately or together.

During the perfusion scan, a health care provider injects radioactive albumin into your vein. You are placed on a movable table that is under the arm of a scanner. The machine scans your lungs as blood flows through them to find the location of the radioactive particles.

During the ventilation scan, you breathe in radioactive gas through a mask while you are sitting or lying on a table under the scanner arm.

How to Prepare for the Test

You do not need to stop eating (fast), be on a special diet, or take any medicines before the test.

A chest x-ray is usually done before, and sometimes after a ventilation and perfusion scan.

You wear a hospital gown or comfortable clothing that does not have metal fasteners.

How the Test will Feel

The table may feel hard or cold. You may feel a sharp prick when the IV is placed in the vein in your arm for the perfusion part of the scan.

The mask used during the ventilation scan may make you feel nervous about being in a small space (claustrophobia). You must lie still during the scan.

The radioisotope injection usually does not cause discomfort.

Why the Test is Performed

The ventilation scan is used to see how well air moves and blood flows through the lungs. The perfusion scan measures the blood supply through the lungs.

A ventilation and perfusion scan is most often done to detect an acutepulmonary embolus (blood clot in the lungs). It is also used to:

  • Detect abnormal circulation (shunts) in the blood vessels of the lungs (pulmonary vessels)
  • Detect abnormal circulation from multiple old blood clots (chronic thromboembolic disease)
  • Test regional (different lung areas) lung function in people with advanced pulmonary disease, such as COPD

Normal Results

The provider should take a ventilation and perfusion scan and then evaluate it with a chest x-ray. All parts of both lungs should take up the radioisotope evenly.

What Abnormal Results Mean

If the lungs take up lower than normal amounts of radioisotope during a ventilation or perfusion scan, it may be due to any of the following:

  • Airway obstruction
  • Chronic obstructive pulmonary disease (COPD)
  • Pneumonia
  • Narrowing of the pulmonary artery
  • Pneumonitis (inflammation of the lungs due to breathing in a foreign substance)
  • Pulmonary embolus
  • Chronic thromboembolic pulmonary disease
  • Reduced breathing and ventilation ability

Risks

Risks are about the same as for x-rays (radiation) and needle pricks.

No radiation is released from the scanner. Instead, it detects radiation and converts it into an image.

There is a small exposure to radiation from the radioisotope. The radioisotopes used during scans are short-lived. All of the radiation leaves the body in a few days. However, as with any radiation exposure, caution is advised for pregnant or breastfeeding women.

There is a slight risk for infection or bleeding at the site where the needle is inserted. The risk with perfusion scan is the same as with inserting an intravenous needle for any other purpose.

In rare cases, a person may develop an allergy to the radioisotope. This may include a serious anaphylactic reaction.

Considerations

A pulmonary ventilation and perfusion scan may be a lower-risk alternative to pulmonary angiography for evaluating disorders of the lung blood supply.

This test may not provide a definite diagnosis, particularly in people with lung disease. Other tests may be needed to confirm or rule out the findings of a pulmonary ventilation and perfusion scan.

This test has largely been replaced by CT pulmonary angiography for diagnosing pulmonary embolism. However, people with kidney problems or an allergy to contrast dye can more safely have this test.

Alternative Names

V/Q scan; Ventilation/perfusion scan; Lung ventilation/perfusion scan; Pulmonary embolism - V/Q scan; PE- V/Q scan; Blood clot - V/Q scan

Images

  • Pulmonary ventilation/perfusion scan: MedlinePlus Medical Encyclopedia (1)Albumin injection

References

Goldhaber SZ, Piazza G. Pulmonary embolism and deep vein thrombosis. In: Libby P, Bonow RO, Mann, DL, Tomaselli GF, Bhatt DL, Solomon SD, eds. Braunwald's Heart Disease: A Textbook of Cardiovascular Medicine. 12th ed. Philadelphia, PA: Elsevier; 2022:chap 87.

Herring W. Nuclear medicine: understanding the principles and recognizing the basics. In: Herring W, ed. Learning Radiology: Recognizing the Basics. 4th ed. Philadelphia, PA: Elsevier; 2020:e24-e42.

Murphy JA, Safi F. Ventilation-perfusion scan. In: Hughes G, ed. A Medication Guide to Internal Medicine Tests and Procedures. Philadelphia, PA: Elsevier; 2022:chap 60.

Review Date 7/31/2022

Updated by: Denis Hadjiliadis, MD, MHS, Paul F. Harron, Jr. Professor of Medicine, Pulmonary, Allergy, and Critical Care, Perelman School of Medicine, University of Pennsylvania, Philadelphia, PA. Also reviewed by David C. Dugdale, MD, Medical Director, Brenda Conaway, Editorial Director, and the A.D.A.M. Editorial team.

Related MedlinePlus Health Topics

  • COPD
  • Lung Diseases
  • Nuclear Scans
  • Pulmonary Embolism
Pulmonary ventilation/perfusion scan: MedlinePlus Medical Encyclopedia (2024)

FAQs

Pulmonary ventilation/perfusion scan: MedlinePlus Medical Encyclopedia? ›

The perfusion scan measures the blood supply through the lungs. A ventilation and perfusion scan is most often done to detect an acute pulmonary embolus (blood clot in the lungs).

What is pulmonary ventilation perfusion scan? ›

Pulmonary ventilation (V) and Perfusion (Q) scan, also known as lung V/Q scan, is a nuclear test that uses the perfusion scan to delineate the blood flow distribution and the ventilation scan to measure airflow distribution in the lungs.

What lung problem can a ventilation perfusion scan be used to detect? ›

Its most common clinical use is in the workup of suspected pulmonary embolism. This activity reviews the use of a VQ scan in evaluating pulmonary embolism and other clinical scenarios.

Why would a ventilation perfusion scan be ordered? ›

Why do I need a VQ scan? A VQ scan can help to diagnose a blood clot in the lungs. If left untreated, blood clots can be fatal. If you have symptoms of a blood clot, such as shortness of breath and a sharp pain when you breathe in, your doctor might recommend a VQ scan.

Do you need to be NPO for a VQ scan? ›

You don't need to do anything specific to prepare for a VQ scan. You can eat and take medications as you normally would. Tell your provider: If you're pregnant or think you might be.

How long does a lung perfusion scan take? ›

How long does the test take? The two scans are usually done together and will take about an hour. The ventilation scan takes about 15 to 30 minutes, and the perfusion scan takes about 5 to 10 minutes.

How long does a ventilation perfusion test take? ›

The Ventilation Perfusion Test takes approximately 45 minutes. You will lay on an examination table while the medical technician arranges the intravenous line (IV). The line will be inserted into a vein on your hand or your arm. You might experience slight discomfort from the IV line.

Is a VQ scan better than a CT scan? ›

CT is faster and produces sharper images, which many believe make the results easier to interpret. Also, at most hospitals, a CT scanner is available 24/7, while nuclear medicine technicians needed to perform a V/Q study may not be on call, especially on nights and weekends.

What abnormalities are associated with lung perfusion? ›

What Abnormal Results Mean
  • Airway obstruction.
  • Chronic obstructive pulmonary disease (COPD)
  • Pneumonia.
  • Narrowing of the pulmonary artery.
  • Pneumonitis (inflammation of the lungs due to breathing in a foreign substance)
  • Pulmonary embolus.
  • Chronic thromboembolic pulmonary disease.
  • Reduced breathing and ventilation ability.

What is a normal lung perfusion scan result? ›

A normal pulmonary perfusion scan has no perfusion defects or perfusion exactly outlines the shape of the lungs seen on the chest radiograph.

What would a VQ scan tell the doctor? ›

How Does a VQ Scan Work? This scan is mostly used to help doctors diagnose a blood clot in your lungs. This is called a pulmonary embolism. Your doctor also may request this test to check out your lungs before a certain surgery.

How much does a VQ scan cost? ›

On MDsave, the cost of a Lung Ventilation/Perfusion Scan ranges from $581 to $1,966.

How is a ventilation perfusion scan done? ›

Your child will be asked to breathe normally into the bag. During the perfusion part of the test, a radiopharmaceutical called Technetium-99m MAA will be injected in one of your child's veins. A special camera, called a gamma camera, is used to take pictures of the lungs after the radiopharmaceutical has been injected.

What is the difference between VQ scan and lung perfusion scan? ›

Pulmonary ventilation (V) and Perfusion (Q) scan, also known as lung V/Q scan, is a nuclear test that uses the perfusion scan to delineate the blood flow distribution and the ventilation scan to measure airflow distribution in the lungs.

How do you prepare for a VQ lung scan? ›

It'll also be necessary to remove any metal jewelry, including piercings, so you may wish to also avoid wearing jewelry to the test. Generally, there is no special dietary preparation, such as fasting, before the scan. You may also be asked to have an X-ray of your chest done 24 to 48 hours before your test.

Can a VQ scan detect lung disease? ›

The two scans may be done separately or together. A V/Q scan uses a small amount of a radioactive substance called a tracer that helps look for disease in the body. The scans help diagnose different lung conditions, including a pulmonary embolism (PE).

How is a ventilation scan done? ›

For a ventilation scan, you will breathe in a gas with the tracer in it through a face mask or a tracer may be injected. You will then be asked to hold your breath for a short time. The radiologist will use the scanner to take images of your lungs while you are holding your breath.

What is a normal ventilation perfusion rate? ›

In a healthy individual, the V/Q ratio is 1 at the middle of the lung, with a minimal spread of V/Q ratios from 0.3 to 2.1 from base to apex.

References

Top Articles
Latest Posts
Article information

Author: Kieth Sipes

Last Updated:

Views: 6003

Rating: 4.7 / 5 (67 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Kieth Sipes

Birthday: 2001-04-14

Address: Suite 492 62479 Champlin Loop, South Catrice, MS 57271

Phone: +9663362133320

Job: District Sales Analyst

Hobby: Digital arts, Dance, Ghost hunting, Worldbuilding, Kayaking, Table tennis, 3D printing

Introduction: My name is Kieth Sipes, I am a zany, rich, courageous, powerful, faithful, jolly, excited person who loves writing and wants to share my knowledge and understanding with you.