Wifithermostat Com Videos Rth6500Wf (2024)

FAQs

How do I connect my Honeywell rth6500wf to WiFi? ›

Using a web browser on your mobile device, access the thermostat's “WiFi Setup” page and select your home network. Then, enter your password. Visit mytotalconnectcomfort.com and register your product for remote use.

Locate your Thermostat on the wall and tap the Menu button. Tap the WiFi option in the Menu. Choose the WiFi Network Name from the list and enter the Network Password. You will see a Success message on the Thermostat when complete.

If the thermostat is showing offline, try resetting your WiFi router. Make sure the network is a standard home network and does not require logging in from a web page, such as a guest network or business network. This specifically speaks to “Dual Band” routers which support both 2.4 GHz and 5 GHz networks.

Search for your home's Wi-Fi network and tap it. Even if your router has enhanced features that allow it to display guest networks, select your home network. Tap CONNECT and enter your password if necessary. The thermostat screen will display a waiting message during this process.

Reconnect your thermostat to Wi-Fi

On your thermostat, open the Quick View menu. Reset. Choose your Wi-Fi network name and enter your password if prompted. If your thermostat still has trouble connecting, go to step 10 and check the settings on your Wi-Fi router or access point.

How to Set the Temperature of Your Honeywell Thermostat. If you have a manual thermostat, setting the temperature on your Honeywell thermostat is simple. All you need to do is to press the up and down buttons to set the temperature. The temperature you set will stay until you change the temperature again.

Try checking the circuit breaker box or replacing the batteries. Bad wiring: The thermostat may be unresponsive if the wiring has gone bad. Remove the cover and check inside for loose, detached, or corroded wires. If you spot any problems, contact an HVAC technician for assistance.

Restart your router by pressing the ON/OFF button or by unplugging the device then plugging back in after approximately five seconds. If the problem persists, you may need to reset the thermostat's WiFi connection or reset your home WiFi.

Why is my wireless thermostat not working? ›

Check the batteries in the thermostat

It sounds so obvious but this is a really common thing. Being wireless, the sole power source for the thermostat is its batteries and they don't last forever. Try changing the batteries and then turn the heating on.

Switch from wired to wireless:

Disconnect these 2 wires and instead connect the gray and black wires from the boiler adapter of the Thermostat Relay. Connect the brown and blue wires of the Relay boiler adapter to the 230V power supply of the heater, respectively L and N, leaving the existing wires in place.

For the thermostat to work properly, the red wires must be connected to the correct corresponding terminal. The C, or common wire, provides smart thermostats with continual power. It's usually blue, but it may also be black, brown or purple. The O or orange wire connects to your heat pump (if applicable).

HOW THE C-WIRE WORKS ON YOUR THERMOSTAT. Known as the common wire, (C-Wire) provides WiFi thermostats continuous power from heating (e.g. furnaces) and cooling systems (e.g. Air Conditioning systems). C-Wires are required on all Resideo WiFi thermostats.